AF000019
Figure 89. Installing the Rack Handle
6.Install the server system cover. For instructions, see “Installing the Server System Cover”.
7.Install the front bezel. For instructions, see “Installing the Front Bezel”.
8.Plug all peripheral devices and the AC power cable(s) into the server.
Removing the Rack Handles
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel”.
4.Remove the server system cover. For instructions, see “Removing the System Cover”.
5.Remove the two screws holding the rack handle in place, and remove the rack handle from the server system as shown in the figure below.
Intel® Server System SR2500AL User’s Guide | 99 |
