5.Pull up on the air baffle to remove it. See the figure below. You may need to remove or hold cables out of the way.
TP02134
Figure 32. Removing the Large Air Baffle
Installing the Large Air Baffle
1.Lower the baffle into the server system and snap into the server board standoff as shown in the figure below.
2.While setting the baffle into place, route the cables beneath it appropriately. See Appendix , “Cable Routing” or the Quick Reference Label that came with your system for help in determining where the cables should be routed.
Intel® Server System SR2500AL User’s Guide | 43 |