System Boots when Installing PCI Card

System Management features require full-time "standby" power. This means some parts of the system have power going to them whenever the power cord is plugged in, even if you have turned the system power off with the power button on the front panel. If you install a PCI card with the AC power cord plugged in, a signal may be sent to command the system to boot. Before installing a PCI card, you should always:

•Turn off the server power by using the power button on the front of the system.

•Unplug the AC power cord(s) from the server.

Problems with Newly Installed Application Software

Problems that occur when you run new application software are usually related to the software, not the server hardware. Faulty equipment is unlikely, especially if other software runs correctly.

Check the following:

•Make sure the system meets the minimum hardware requirements for the software. See the software documentation.

•Make sure the software is properly installed and configured for the system. See the software documentation.

•Use only an authorized copy. Unauthorized copies often do not work.

•If you are running the software from a CD-ROM or DVD-ROM, try a different disk.

•Make sure the correct device drivers installed.

If the problems persist, contact the software vendor's customer service representative.

Problems with Application Software that Ran Correctly Earlier

Problems that occur after the system hardware and software have been running correctly sometimes indicate equipment failure. However, they can also be caused by file corruption or changes to the software configuration.

Check the following:

•If you are running the software from a CD-ROM or DVD-ROM, try a different disk.

•Check your system for a virus infection.

•Uninstall and reinstall the software. Make sure all necessary files are installed.

•If the problems are intermittent, there may be a loose cable, dirt in the keyboard (if keyboard input is incorrect), a marginal power supply, or other random component failures.

•If you suspect that a transient voltage spike, power outage, or brownout might have occurred, reload the software and try running it again. Symptoms of voltage spikes

118

Intel® Server System SR2500AL User’s Guide

Page 139 Page 141
Page 140
Image 140
Intel SR2500AL manual System Boots when Installing PCI Card, Problems with Newly Installed Application Software
Page 139 Page 141

SR2500AL specifications

The Intel SR2500AL is a high-performance server chassis designed to support a wide range of enterprise applications. Built on Intel's robust architecture, it aims to deliver exceptional efficiency, reliability, and flexibility, which are paramount in a modern data center environment.

One of the main features of the SR2500AL is its versatility in supporting various Intel server motherboards and processor configurations. The chassis can accommodate dual Intel Xeon processors, thereby enabling high levels of processing power suitable for multi-threaded applications. This dual-processor support is crucial for businesses that require high-performance computing capabilities for tasks such as data analytics, virtualization, and cloud computing.

The SR2500AL supports up to 16 DIMM slots, allowing for substantial memory capacity. This flexibility is crucial for applications that require a large amount of RAM to function efficiently, thereby minimizing bottlenecks and enhancing overall system performance. Furthermore, the chassis supports a wide variety of memory types, including ECC (Error-Correcting Code) memory, which enhances system reliability by detecting and correcting common data corruption issues.

In terms of storage, the SR2500AL provides multiple drive bays that can support SAS (Serial Attached SCSI) and SATA (Serial ATA) drives, offering IT administrators the flexibility to configure their storage solutions according to their specific requirements. The server can be configured with both traditional spinning hard drives and solid-state drives, allowing for tailored performance and storage capacity that meets diverse business needs.

Cooling is another critical aspect of the SR2500AL's design. It features advanced thermal management technologies to maintain optimal operating temperatures, thus enhancing the longevity and reliability of the components housed within. The chassis includes multiple strategically placed fans and airflow optimization features that help in the efficient dissipation of heat.

Connectivity is also a strong point for the SR2500AL. It offers a variety of network interface options, enabling seamless data transfer and integration into existing network infrastructures. The chassis can support both Gigabit Ethernet and 10GbE (10 Gigabit Ethernet) networking options, ensuring that businesses can achieve the bandwidth required to maintain high-performance operations.

Overall, the Intel SR2500AL combines powerful processing capabilities, extensive memory support, flexible storage options, and advanced cooling solutions, making it an ideal choice for businesses looking to enhance their infrastructure. With its robust design and thoughtful features, the SR2500AL stands out as a reliable server solution in the demanding landscape of modern enterprise computing.
Top Page Image Contents