Intel SR2500AL manual Side, A B C

A

B

C

AF000326

Figure 53. Removing the PCI Riser Card from the Server System (Full Height

Side)

10.Install the replacement riser connector, if desired. For instructions, see “Installing PCI Riser Card into the Server System”.

11.Install the PCI add-in card(s) if desired. For instructions, see “Installing a PCI Add- in Card”.

12.Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly”.

13.Connect any cables to add-in cards that require them. See your add-in card documentation for information and add-in card requirements.

14.Re-install the processor air duct. For instructions, see “Installing the Processor Air Duct”.

15.Install the server system cover. For instructions, see “Installing the Server System Cover”.

16.Plug all peripheral devices and the AC power cable(s) into the server.

Intel® Server System SR2500AL User’s Guide 61