Replacing the Mid-plane Board
The instructions below describe how to replace the
Removing the Mid-plane Board
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Disconnect all cables from the
5.Remove the bridge board by lifting the retention mechanism from the
A
B
B C
A
AF000164
Figure 61. Removing the Bridge Board from the Server System
6.Remove the fan module. For instructions, see “Replacing a Fan Module”.
7.Hold the
Intel® Server System SR2500AL User’s Guide | 71 |