3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Remove the processor air duct by lifting straight up.
5.Disconnect any cables attached to any
6.Grasp both riser latches with thumb and forefinger (see letter “A”), and pull up to release riser assembly.
7.Lift riser assembly straight up (see letter “B”).
A
B
TP02145
Figure 51. Removing PCI Riser Assembly from the Server System
8.If you need to add or replace a PCI
9.If you need to add or replace a PCI riser connector, see “Replacing a PCI Riser Card”.
10.If you removed the PCI riser assembly for another procedure, continue with that procedure.
58 | Intel® Server System SR2500AL User’s Guide |