Intel SR2500AL manual Removing the RAID Battery Backup Unit

9. Plug all peripheral devices and the AC power cable(s) into the server.

Removing the RAID Battery Backup Unit

1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.

2.Power down the server and unplug all peripheral devices and the AC power cable(s).

3.Remove the server system cover. For instructions, see “Removing the System Cover”.

4.Remove the large air baffle. For instructions, see “Removing the Large Air Baffle”.

5.Remove the cable from the rear of the RAID battery backup unit and the mid-plane board as shown in the figure below (see letter “A”).

6.Slide the RAID battery backup unit forward and lift from the server system (see letter “B”).

B

A

AF000150

Figure 70. Removing the RAID Battery Backup Unit

7.Install the large air baffle. For instructions, see “Installing the Large Air Baffle”.

8.Install the server system cover. For instructions, see “Installing the Server System Cover”.

9.Plug all peripheral devices and the AC power cable(s) into the server.

80 Intel® Server System SR2500AL User’s Guide