Intel SR2500AL manual Peripheral Devices, Hard Disk Drives, Optional Peripherals

Models: SR2500AL

1 210
Download 210 pages 25.57 Kb
Page 44
Image 44
Peripheral Devices

Peripheral Devices

The server system provides locations and hardware for installing hard drives, a USB floppy drive, CD-ROM drive, or DVD-ROM drive. The drives must be purchased separately. The following figure shows the available options.

AB

E

.

D

C

TP02126

A.Slimline Optical Drive Bay

B.Tape Drive Filler Panel

C.6th HDD or Tape Drive Bay (Optional)

D.Hard Disk Drive Bays

E.HDD to Floppy Drive Conversion (Optional)

Figure 15. Optional Peripherals

Hard Disk Drives

The server system ships with five drive carriers for installing five SAS or Serial ATA (SATA) hot-swap drives.

Note: SAS drives are supported on the Intel® Server System SR2500ALLX/SR2500ALLXR only.

One left drive bay can be converted to be used as a floppy bay. To use the bay for a floppy drive, the AXXFLOPHDDTRAY accessory kit must be used.

For instructions on installing hard drives, see “Installing and Removing a Hot-swap Hard Drive”.

Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45C.

Note: The Intel® Server System SR2500ALLX and/or the Intel® Server System SR2500ALBRP does not support all SAS or Serial ATA (SATA) hard drives. See “Server System References” for an Internet link to a list of supported hardware.

22

Intel® Server System SR2500AL User’s Guide

Page 44
Image 44
Intel SR2500AL manual Peripheral Devices, Hard Disk Drives, Optional Peripherals