Installing and Removing the I/O Expansion Module(s)
Installing the I/O Expansion Module(s)
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser Assembly”.
5.Squeeze the sides of the I/O expansion module cover(s) to disengage it from the server system back panel and remove it. See letter “A” in the figure below.
6.Attach the standoffs to the server board (see letter “B” in the figure below) and attach the I/O expansion module(s) to the server board (see letter “C” in the figure below).
I/O Module
(Dual Gigabit)
I/O Module
(External SAS)
B
C
A
AF000740
Figure 57. Installing the I/O Expansion Module to the Server Board
7.Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly”.
8.Install the processor air duct. For instructions, see “Installing the Processor Air Duct”.
9.Install the server system cover. For instructions, see “Installing the Server System Cover”.
10.Plug all peripheral devices and the AC power cable(s) into the server.
66 | Intel® Server System SR2500AL User’s Guide |
