Elation Professional 60 Tri manual CHS5 Sped

Design LED 60 TriStrip™

				FADE(	)	0-255	Adjust program 4 fade time
				STRB(	)	0-255	Adjust strobe rate of program 4
		CHS5(	)	SPED(	)	0-255	Adjust program 5 speed
				FADE(	)	0-255	Adjust program 5 fade time
				STRB(	)	0-255	Adjust strobe rate of program 5
		CHS6(	)	SPED(	)	0-255	Adjust program 6 speed
				FADE(	)	0-255	Adjust program 6 fade time
				STRB(	)	0-255	Adjust strobe rate of program 6
		CHS7(	)	SPED(	)	0-255	Adjust program 7 speed
				FADE(	)	0-255	Adjust program 7 fade time
				STRB(	)	0-255	Adjust strobe rate of program 7
		CHS8(	)	SPED(	)	0-255	Adjust program 8 speed
				FADE(	)	0-255	Adjust program 8 fade time
				STRB(	)	0-255	Adjust strobe rate of program 8
SOND		CTRL(	)	MAST(	)	Assigns fixture as Master unit in Sound Activate mode
(	)			ALON(	)	Assigns fixture as Sound Active, Stand Alone
		MIC(	)	M-XX(		)	Microphone sensitivity adjustment
OTHR		DIMR(	)	MOD1(	)		Standard - Fixture will function with a
(	)						stepping dimmer rate
				MOD2(	)		Linear - Fixture will function with a
							dimming rate of 0~100%
		LODA(	)	YES(	)		Reset to Fixture to the Factory Default
							Settings
		VER(	)	V X.X(	)		“X.X’ will represent the fixture’s current
							firmware version

Default settings shaded.

Remarks:

1)If the fixture does not receive a DMX signal the menu display will flash repeatedly.

2)SPED: This function is used to adjust the hold time for the scenes in the built-in chase programs.

3)FADE: This function is used to adjust the fade time between each scene in the built-in programs.

©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com