Elation Professional DP-640B Operation Guide Control and Functions, Data & Power Connections

Operation Guide

Control and Functions

Function Mode 3: Local Control (Manual)

The Local Control option allows for manual control of the packs six channels via the on-board buttons.

PANIC 1 2 3 4 5 6

ON	MD		Press the MENU button until the "Local Control'
1 2	3 4 5	6
DMX Address			LED illuminates. The display will read	.
			DMX Signal

Patch Address						OK	This means that channel 1 output level is
Dimmer / Switch							currently set to 0.
Local Control
	1	2	3	4	5	6
PANIC	1	2	3	4	5	6

Data & Power Connections

12

3 4

1.DMX IN:

3 & 5 Pin (male) input socket.

2.DMX OUT:

3 & 5 Pin (female) output socket.

3.Power 1:

Power cord 1- powers channels 1~3, 2400 watts.

4.Power 2:

Power cord 2- powers channels 4~6, 2400 watts.

ON	MD
1 2	3 4 5	6

LED-display & Control buttons

DMX Address	DMX Signal						(1)Select the channel that you wish to manually
Patch Address						OK	control by selecting from buttons 1-6. Only one
Local Control							channel can be selected at a time.
Dimmer / Switch
MENU	1		3	4	5	6
PANIC	1	2	3	4	5	6

ON MD

12

PANIC 1 2

ON			MD
1	2 3	4	5 6

1

2 DMX Address DMX Signal

1.LED-display:displays the current

11		value and function mode-including
		a DMX signal indicator.
5 6		2. DMX Address LED: this LED
		illuminates when in DMX mode.
	10	3. Patch Address LED: this LED
		illuminates when in Patch mode.
	OK

1 2 3 4 5 6

(2) Press the UP/ Down button to adjust the dim

3

4

PatchAddress

Local Control

9 4. Local Control LED: this LED

illuminates when in Manual

DMX Address	DMX Signal
Patch Address		value to your desired setting. The dim range
Local Control

Dimmer / Switch

5

8

Control mode.

Dimmer / Switch						is from 000 to 100%.
MENU	1	2	3	4	5	6

PANIC		1	2	3	4	5	6		(3) Press the "OK" button to confirm and save
ON	MD								your setting, the display will momentarily flash
1 2	3 4 5	6							confirming that your setting was stored.
Patch Address									Repeat steps 1, 2 and 3 to manually set
DMX Address		DMX Signal						OK
									additional channel levels and store them.
Local Control
Dimmer / Switch									These settings will be stored to memory until
									you dis-engage the set channels.

MENU 1 2 3 4 5 6

7

MENU	1 2 3 4 5 6	5. Dimmer/Switch LED: this LED
		illuminates when assigning dim/
		switch modes.
6	7

6.Menu Button: The menu button allows you navigate through function modes.

7.Channel Buttons 1~6: These buttons are used to select relevant channels.

8.Down Button: This button decreases values and selects desired function modes.

9.OK Button: This button confirms and saves relevant settings.

10.UP Button: This button increases values and selects desired function modes.

11.Channel 1~6 LEDs: Indicate output for relevant channels.

12.Panic dip-switches:These switches are used to activate selected channels to full ON when DMX signal is not present.

4