Features
Thank you for purchasing the
6 channel hybrid pack with dual Edison sockets per channel.
3 & 5 pin XLR inputs and outputs.
Each channel can be assigned to Dim or Switch modes.
4 function LED's for DMX Address, Patch Address, Local Control and Dim/Switch modes.
On board Local Control allows for dim intensity adjustment, from
Panic function dip switches.
Dual 20A/AC120V Power line cords.
Digital
Two 20 Amp circuit breakers.
Every effort has been made to design dependable and reliable products. New products are constantly being designed to meet the needs of the entertainment lighting industry. Your comments regarding our products and services are welcome. Please send any comment to info@elationlighting.com and let us kanow how we can improve to better serve you.
It is both a privilege and a pleasure to serve you.
Troubleshooting
Troubleshooting
No Power to the pack:
Disconnect the main power line cord. Reconnect the line cord to ensure proper connection. If the problem still persists, check the building service panel and make sure the circuit breakers are in the ON position.
No Channel output:
Disconnect the main power line cords. Check the circuit breakers to ensure the are in the ON position. Reconnect line cords. If controlling via DMX, ensure that you are receiving DMX signal at the pack. Indicator in the display should be flashing when signal is present. If signal is not present, check the XLR connections from console or previous fixture in line. If problem still persists, replace XLR cable between previous device and pack and try again.
Undesired 100% channel switch output:
Flip all "PANIC" dip switches to the OFF position. If problem still persists, check the "LOCAL CONTROL" settings and reset channels by pressing the corresponding channel button two times so that the channel LED turns OFF. Then press the "OK" Button store the settings.
If you've tried the above and the unit continues to malfunction, please contact ELATION 
customer service at (323)
1
10
