![](/images/new-backgrounds/1290205/29020515x1.webp)
Operation Guide
*Note: Abbreviations within the display represent the following: A=Address, C=Channel, d= Display, s=Switch.
Press the MENU button to navigate through the menu options. Continually
Operation Guide
Function Mode 2: Patch Address (Individual)
pressing the MENU button will loop through the four options as illustrated below. When in each function mode, its LED will illuminate.
Press | Press |
| Press |
DMX Address | Patch Address | Local Control | Dimmer/Switch |
Menu button | Menu button |
| Menu button |
Function Mode 1: DMX Address (Block)
PANIC | 1 | 2 | 3 | 4 | 5 | 6 |
ON | MD | |
1 2 | 3 4 5 | 6 |
DMX Address | DMX Signal |
|
|
|
|
|
|
|
| OK | |
|
|
|
|
| |
Patch Address |
|
|
|
|
|
|
|
|
|
| |
Local Control |
|
|
|
|
|
Dimmer / Switch |
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
Press the MENU button until the Patch Address LED illuminates. The display will show you the current patch setting for channel 1. For example, if channel 1 was set to DMX channel 82, the
display would read the following: . The number 1 in the display indicates channel 1 of the pack. The next three digits indicate the current DMX address for the selected channel.
PANIC | 1 | 2 | 3 | 4 | 5 | 6 |
ON | MD | |
1 | 2 3 4 | 5 6 |
DMX Address | DMX Signal |
OK
Patch Address
(1) This function is used when setting the starting |
DMX address channel for the pack. Use the |
UP/DOWN buttons to adjust to a desired |
setting. The selected DMX channel will be the |
Note: If you set a starting DMX address channel in the DMX address option, channel one from the pack will assume that address channel and channels 2 through 6 will automatically be assigned a sequential DMX channel based on the channel 1 address.
Local Control
Dimmer / Switch
MENU | 1 | 2 | 3 | 4 | 5 | 6 |
PANIC | 1 | 2 | 3 | 4 | 5 | 6 |
ON | MD | |
1 | 2 3 4 | 5 6 |
DMX Address | DMX Signal |
OK
Patch Address
Local Control
DMX starting address for the pack. A total of |
six DMX channels will be occupied by the |
channel. |
(2) Press the "OK" button to confirm and save |
your setting, the |
flash confirming that your address was stored. |
PANIC | 1 | 2 | 3 | 4 | 5 | 6 |
ON | MD | |
1 2 | 3 4 5 | 6 |
DMX Address | DMX Signal |
|
|
| OK |
|
|
|
| ||
|
|
|
|
| |
Patch Address |
|
|
|
|
|
|
|
|
|
| |
Local Control |
|
|
|
|
|
|
|
|
|
| |
Dimmer / Switch |
|
|
|
|
|
|
|
|
|
|
MENU | 1 | 3 | 4 | 5 | 6 |
PANIC | 1 | 2 | 3 | 4 | 5 | 6 |
ON | MD | |
1 2 | 3 4 5 | 6 |
(1)Select a channel button that you want to address. Use the UP/DOWN button to adjust the channel setting. The address can be set anywhere between
(3) Press the "OK" button to save your setting. |
Dimmer / Switch
MENU | 1 | 2 | 3 | 4 | 5 | 6 |
DMX Address | DMX Signal |
OK
Patch Address
Local Control
Dimmer / Switch
The display will momentarily flash confirming |
that your patch setting has been stored. Repeat |
setp1 & 2 to patch additional channels. |
MENU | 1 | 2 | 3 | 4 | 5 | 6 |
5
6