SUPER MICRO Computer 1018D-73MTF user manual ME Recovery, SAS Enable, Manufacturer Mode Select

Chapter 5: Advanced Motherboard Setup

ME Recovery

Set Jumper JPME1 to select ME Firm- ware Recovery mode, which will limit system resource for essential function use only without putting restrictions on power use. In the single operation mode, online upgrade will be available via Re- covery mode. See the table on the right for jumper settings.

SAS Enable

Jumper JPS1 allows the user to enable the onboard SAS connectors (L-SAS Ports 0-7). The default setting is 1-2 to enable the connection. See the table on the right for jumper settings.

Manufacturer Mode Select

Close this jumper (JPME2) to bypass SPI flash security and force the system to use the Manufacturer mode which will allow the user to flash the system firmware from a host server to modify system settings. See the table on the right for jumper settings.

ME Recovery

Jumper Settings

Jumper Setting Definition

Pins 1-2	Normal (Default)
Pins 2-3	ME Recovery

SAS Enable

Jumper Settings

Jumper Setting	Definition
Pins 1-2	Enabled (Default)
Pins 2-3	Disabled

ME Mode Select

Jumper Settings

Jumper Setting Definition

Pins 1-2 Normal (Default)

Pins 2-3 Manufacture Mode

5-21