SUPER MICRO Computer 1018D-73MTF user manual DVD Drive Installation, Removing a Hard Drive

SUPERSERVER 1018D-73MTF User's Manual

Figure 6-4. Removing a Hard Drive

12

1

DVD Drive Installation

The SC113MTQ chassis may have a DVD-ROM installed (optional).

Installing or Replacing a DVD-ROM Drive (Figure 6-5)

1.Power down the system and if necessary, remove the server from the rack and the front bezel from the chassis.

2.Remove the chassis cover.

3.Unplug the drives power and data cables from the motherboard and/or back- plane.

4.If you are adding a new drive: Remove the mini-bezel (grate) from the drive bay The bezel can be removed by pulling out the hard drive beneath the DVD-ROM, then pulling the mini-bezel forward.

If you are replacing a drive: Locate the locking tab at the rear (left hand side when viewed from the front) of the DVD-ROM drive. Push the tab toward the drive and push the drive unit out the front of the chassis.

5.Insert the new drive unit in the slot until the tab locks in place.

6.Reconnect the data and power cables.

7.Replace the chassis cover (replace the server in the rack, if necessary) and power up the system.

6-6