5-16
SUPERSERVER 1018D-73MTF User's Manual
DOM PWR Connector
The Disk-On-Module (DOM) power con-
nector (JSD1) provides 5V power to a
solid state DOM storage device con-
nected to one of the SATA ports. See the
table on the right for pin defi nitions.
DOM PWR
Pin Defi nitions
Pin# Defi nition
15V
2 Ground
3 Ground
Standby Power
The Standby Power header is located
at JSTBY1 on the motherboard. See the
table at right for pin defi nitions.
Standby Power
Pin Defi nitions
Pin# Defi nition
1 +5V Standby
2 Ground
3 No Connection
Power SMB (I2C) Connector
Power System Management Bus (I2C)
Connector (JPI2C1) monitors power sup-
ply, fan and system temperatures. See
the table on the right for pin defi nitions.
PWR SMB
Pin Defi nitions
Pin# Defi nition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V
T-SGPIO 1/2 & 6-SGPIO 1/2 Headers
Four Serial-Link General Purpose Input/
Output headers (T-SGPIO 1/2 & 6-SGPIO
1/2) are located on the motherboard.
T-SGPIO 1/2 support the onboard SATA
interface and 6-SGPIO 1/2 support the
onboard SAS connections. See the table
on the right for pin defi nitions.
T-SGPIO/6-SGPIO
Pin Defi nitions
Pin# Defi nition Pin Defi nition
2NC 1NC
4 Data 3 Ground
6 Ground 5 Load
8 NC 7 Clock
Note: NC = No Connection.