Zebra Technologies Z4M manual Selecting ZPL Mode, Default ZPL Selections ZPL II, ZPL, Default Feed

Selecting ZPL Mode

Display Shows			Action/Explanation
	Selecting ZPL Mode		Press the INCREMENT (+) or DECREMENT (-) key to
	display other choices.
	Default: ZPL II
	Selections: ZPL II, ZPL
ZPL MODE	The printer will remain in the selected mode until it is changed by this front panel
	instruction or by using a ZPL/ZPL II command. The printer accepts label formats
	written in either ZPL or ZPL II. This eliminates the need to rewrite any ZPL formats
	you already have. Refer to the ZPL II Programming Guide Volume II for more
	information on the differences between ZPL and ZPL II .
Power-Up and Head Close Parameters
	Media Power-Up		Press the INCREMENT (+) or DECREMENT (-) key to
	display other choices.
	Default: Feed
	Selections: Feed, calibration, length, and no motion
MEDIA POWER UP	This parameter establishes the action of the media when the printer is turned
	on.
	• Calibration: Recalibrates the media and ribbon sensors.
	• Feed: Feeds the label to the first web.
	• Length: Determines the length of the label.
	• No Motion: Media does not move.
	Head Close	Press the INCREMENT (+) or DECREMENT (-) key to display
	other choices.
	Default: Feed
	Selections: Feed, calibration, length, no motion
HEAD CLOSE	Determines the action of the media after the printhead has been opened and
	then closed.
	• Calibration: Recalibrates the media and ribbon sensors.
	• Feed: Feeds the label to the first web.
	• Length: Determines the length of the label.
	• No Motion: Media does not move.

50 Zebra Z4M Printer User’s Guide