Zebra Technologies Z4M Label Positioning Parameters, Backfeed Sequence, Label TOP, Left Position

Label Positioning Parameters

Display Shows		Action/Explanation
	Backfeed Sequence	Press the INCREMENT (+) or DECREMENT (-) key to
	display other choices.
	Default: Default (90%)
	Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%, 60%, 70%,
	80%, off
	This parameter establishes when and how much label backfeed occurs after a
	label is removed or cut in the peel-off or cutter modes. It has no effect in
BACKFEED	rewind or tear-off modes. This parameter setting can be superseded by the
	~JS instruction when received as part of a label format (refer to the
	ZPL II Programming Guide Volume I).
	NOTE: The difference between the value entered and 100% establishes how
	much backfeed occurs before the next label is printed. For example,
	a value of 40 means that 40% of the backfeed takes place after the
	label is removed or cut. The remaining 60% takes place before the
	next label is printed. A value of “before” means that all backfeed will
	take place before the next label is printed.
	Adjusting Label Top Position Press the INCREMENT (+) key to increase the
	value, press the DECREMENT (-) key to decrease the value. The displayed
	value represents dots.
	Default: +0
LABEL TOP	Range: -120 to +120 dot rows
	The label top position adjusts the print position vertically on the label. Positive
	numbers adjust the label top position further down the label (away from the
	printhead), negative numbers adjust the position up the label (toward the
	printhead).
	Adjusting Left Position	Press the DECREMENT (-) key to move to the next
	position, press the INCREMENT (+) key to change between + and - and to
	increase the value of the digit. The displayed value represents dots.
	Default: 0000
	Range: -9999 to +9999
LEFT POSITION	NOTE: For a negative value, enter the value before changing to the minus
	sign.
	This parameter establishes how far from the left edge of a label the format will
	begin to print by adjusting horizontal positioning on the label. Positive
	numbers adjust the printing to the left by the number of dots selected,
	negative numbers shift printing to the right.

Zebra Z4M Printer User’s Guide 51