![](/images/new-backgrounds/1264812/264812121x1.webp)
Display Shows |
|
| Action/Explanation | |
| IP Resolution |
| Press the INCREMENT (+) or DECREMENT | |
| other choices. |
|
| |
| Default: Dynamic |
| ||
IP RESOLUTION* | Selections: Dynamic, permanent | |||
| Depending on the selection, allows either the user (”permanent”) or the server | |||
| (”dynamic”) to select the IP address. For more information, refer to ZebraNet | |||
| Networking: PrintServer II Installation and User’s Guide. | |||
|
|
| ||
| IP Protocols | Press the INCREMENT (+) or DECREMENT | ||
| other choices. |
|
| |
| Default: All |
|
| |
IP PROTOCOLS* | Selections: All, gleaning only, RARP, BOOTP, DHCP, DHCP/BOOTP | |||
If “dynamic” was chosen in the previous parameter, this selection determines | ||||
| ||||
| the method(s) by which the PrintServer II will receive the IP address from the | |||
| server. For more information, refer to ZebraNet Networking: PrintServer II | |||
| Installation and User’s Guide. | |||
|
|
| ||
| IP Address | Press the DECREMENT | ||
| position, press the INCREMENT (+) key to increase the value of the digit. | |||
IP ADDRESS* | This parameter allows you to select the IP address if “permanent” was chosen | |||
in “IP RESOLUTION.” (If “dynamic” was chosen, the user cannot select the | ||||
| ||||
| address.) For more information, refer to ZebraNet Networking: PrintServer II | |||
| Installation and User’s Guide. | |||
|
|
|
| |
| Subnet Mask |
| Press the INCREMENT (+) or DECREMENT | |
| other choices. |
|
| |
| Default: Permanent (user must set) | |||
SUBNET MASK* | Selections: Dynamic (user may set, but server can assign), permanent | |||
| This parameter selects the part of the IP address that is considered to be part | |||
| of the local network. It can be reached without going through the default | |||
| gateway. |
|
| |
|
|
| ||
| Default Gateway | Press the DECREMENT | ||
DEFAULT | position, press the INCREMENT (+) key to increase the value of the digit. | |||
|
|
| ||
GATEWAY* | This parameter allows you to select the IP address that the network traffic is | |||
| routed through if the destination address is not part of the local network. | |||
|
|
|
|
* Option required
Zebra Z4M Printer User’s Guide | 53 |