Printer Power
The power supply in the printer automatically detects the applied line voltage and works in the 90 to 265 VAC range.
WARNING!!! For personnel and equipment safety, always use a
NOTE: Depending on how your printer was ordered, a power cord may or may not be included. If one is not included, or if the one included is not suitable for your requirements, refer to “Power Line Cord Specifications” on page 83.
Refer to Figure 1.
The AC power cord connector must be plugged into the mating connector at the rear of the printer.
Make sure that the POWER switch is in the “off” position before connecting the power cord to an electrical outlet.
AC |
power |
switch |
Connector |
Figure 1
Zebra Z4M Printer User’s Guide | 3 |
