Rear Panel Connections
Video Monitor Outputs: Connect these jacks to the composite and/or
Amplifier Inputs: When the jumper pins that link the Preamp Outputs with these inputs are removed, these jacks may be used to connect any external 5.1 channel source (or 2 channel source, if only Main Inputs are used), e.g. processors, to the internal amplifiers. (See page 18 for more information on using these connections.)
Speaker Outputs: Connect these outputs to the matching + or – terminals on your speak- ers. When making speaker connections always make certain to maintain correct polarity by con- necting the red (+) terminals on the AVR5000 to the red (+) terminals on the speakers and the black
(–)terminals on the speakers. See page 15 for more information on speaker polarity.
Switched AC Accessory Outlet: This out- let may be used to power any device that you wish to have turn on when the unit is turned on with the System Power Control switch 2.
Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR5000 is on or off (in Standby), provided that the Main Power switch 1is on.
Note: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts from the
Unswitched Outlet | and 50 W from the |
Switched Outlet . |
|
AC Power Cord: Connect the AC plug to an unswitched AC wall output.
Remote IR Output: This connection per- mits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.
Remote IR Input: If the AVR5000’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.
Multiroom IR Input: Connect the output of an IR sensor in a remote room to this jack to operate the AVR5000’s multiroom control system.
DVD Video Inputs: Connect these jacks to the composite or
Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or
Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or
Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or
Video 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or
Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or
Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source.
Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD play- er to these jacks.
Digital Audio Outputs: Connect these jacks to the matching digital input connector on
adigital recorder such as a
Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.
Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.
Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any Audio recorder.
Note: Either the Video or
Component Monitor Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the two Component
Video Inputs is selected the signal will be sent to these jacks.
Video 2 Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a set top converter box or other video source to these jacks.
DVD Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a DVD player to these jacks.
Note: All component inputs/outputs can be used for RGB signals too, in the same way as described for the Y/Pr/Pb signals, then connected to the jacks with the corresponding color.
RGB connection is not possible if the source outputs a separate sync signal.
