
Main Remote Control Functions
JDirect Button: Press this button when the tuner is in use to start the sequence for direct entry of a station’s frequency. After pressing the button simply press the proper Numeric Keys Hto select a station (See page 33 for more information on the tuner).
KTuning Up/Down: When the tuner is in use, these buttons will tune up or down through the selected frequency band. If the Tuner Mode button Ihas been pressed or the Band but- ton @on the front panel was held pressed so that the AUTO indicator Xis illuminated, pressing either of the buttons will cause the tuner to seek the next station with acceptable signal strength for quality reception. When the AUTO indicator Xis NOT illuminated, pressing these buttons will tune stations in
LOSD Button: Press this button to activate the On Screen Display (OSD) system used to set up or adjust the AVR5000’s parameters.
MMacro Buttons: Press these buttons to store or recall a “Macro”, which is a
NTransport Buttons: These buttons do not have any functions for the AVR, but they may be programmed for the forward/reverse play opera- tion of a wide variety of CD or DVD players, and audio or video- cassette recorders. (See page 39 for more information on programming the remote.)
OSkip Up/Down Buttons: These buttons do not have a direct function with the AVR5000, but when used with a compatibly programmed CD or DVD player/changer they will change the tracks on the disc currently being played.
PRDS Select Button: Press this button to display the various messages that are part of the RDS data system of the AVR5000’s tuner. (See page 34 for more information on RDS).
QPreset Up/Down: When the tuner is in use, press these buttons to scroll through the stations programmed into the AVR5000’s memo- ry. When CD or DVD is selected using the Input Selector button 4, these buttons may func- tion as Slow Fwd/Rev (DVD) or ”+10” (CD).
Clear Button: Press this button to clear incorrect entries when using the remote to directly enter a radio station’s frequency.
Memory Button: Press this button to enter a radio station into the AVR5000’s preset memory. After pressing the button the MEMORY indicator
Uwill flash; you then have five seconds to enter a preset memory location using the Numeric Keys H. (See page 33 for more information.)
Delay/Prev Ch.: Press this button to begin the process for setting the delay times used by the AVR5000 when processing surround sound. After pressing this button, the delay times are entered by pressing the Set button Fand then using the ⁄/¤ buttons Dto change the setting. Press the Set button again to complete the process. (See page 23 for more information.)
›Button: Press this button to change a set- ting or selection when configuring many of the AVR’s settings.
Speaker Select: Press this button to begin the process of configuring the AVR5000’s Bass Management System for use with the type of speakers used in your system. Once the but- ton has been pressed, use the ⁄/¤ buttons
Dto select the channel you wish to set up. Press the Set button Fand then select the speaker type (see page 22 for more informa- tion.)
Volume Up/Down: Press these buttons to raise or lower the system volume.
TV/Video Button: This button does not have a direct function on the AVR 5000, but when used with a compatibly programmed VCR, DVD or satellite receiver that has a “TV/Video” function, pressing this button will switch between the output of the player or receiver and the external video input to that player. Consult the Owner’s Manual for your specific player or receiver for the details of how it implements this function.
SPL Indicator Select: This button acti- vates the AVR5000’s EzSet function to quickly and accurately calibrate the AVR 5000’s output levels. Press and hold the button for three sec- onds and then release it. Note that the Test Tone will begin circulating, and the Program Indicator 2will change colors. During this sequence, EzSet will automatically adjust the output levels for all channels until they are equal, as shown by the Program Indicator lighting green for each channel. (See page 25 for more information on EzSet.)
Direct Input | as the source |
Mute: Press this button to momentarily silence the AVR5000 or TV set being controlled, depending on which device has been selected.
When the AVR5000 remote is being programmed to operate another device, this button is pressed with the Input Selector button 4to begin the programming process. (See page 39 for more information on programming the remote.)
EzSet Sensor Microphone: The sensor microphone for the EzSet microphone is behind these slots. When using the remote to calibrate speaker output levels using EzSet, be sure that you do not hold the remote in a way that covers these slots. (See page 25 for more information on using EzSet).
Light Button: Press this button to activate the remote’s
NOTE: As any of the remote buttons pressed is active with the device selected, the correspon- ding Selector button 45will briefly flash red to confirm your selection.
MAIN REMOTE CONTROL FUNCTIONS 13