
Table of Contents
3Introduction
4Safety Information
5Front Panel Controls
7Front Panel Information Display
9Rear Panel Connections
11Main Remote Control Functions
14Zone II Remote Control Functions
15Installation and Connections
19System Configuration
19Speaker Selection and Placement
20First Turn On and Use of OSD
20Settings to be Made With Each Input Used
21Input Setup
21Surround Setup
22Speaker Setup
23Adjustments for Other Inputs
23Making Settings independent of selected Input
23Delay Settings
24Night Mode Settings
24Output Level Adjustment
25Using EzSet
25Manual Output Level Adjustment
27Operation
27Basic Operation
27Source Selection
27Controls and Use of Headphones
28Surround Mode Chart
29Surround Mode Selection
29Digital Audio Playback
31Tape Recording
32Output Level Trim Adjustment
33
33Memory Backup
33Tuner Operation
34RDS Operation
36Advanced Features
36Display Brightness
36Turn On Volume Level
37Semi OSD Settings
37
38Multiroom Operation
39Programming the Remote
39Programming the Remote with Codes
40Code Readout
40Learning Codes From a Remote
41Macro Programming
42Programmed Device Function
42Volume
43Channel Control
43Transport Control
43Reassigning Device Control Selectors
43Resetting the Remote Memory
44Function List
46Setup Code Tables
56Troubleshooting Guide
56Processor Reset
57Technical Specifications
2TABLE OF CONTENTS
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500
FRANCE
declare in own responsibility, that the product described in this owner’s manual is in compliance with technical stan- dards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN
Carsten Olesen
Harman Kardon Europe A/S
11/00
Typographical Conventions
In order to help you use this manual with the remote control,
EXAMPLE – (bold type) indicates a specific remote control or
EXAMPLE – (OCR type) indicates a message that is visible on the
1– (number in a square) indicates a specific
– (number in a circle) indicates a
0– (number in an oval) indicates a button or indicator on the remote
A– (letter in a square) indicates an indicator in the
å– (letter in an oval) indicates a button on the Zone II remote