Omron C200HW-CLK21 Network Status, CVM1, and CV-series PLCs, CS/CJ-series, CVM1, CV-series PLCs

Using the Message Service									Section 6-3
C200HX/HG/HE PLCs
			Name			Operating	Address		Contents
						level
		Network Instruction				1	SR 25204		0: Execution not possible (already
		Enabled Flag							executing)
						0	SR 25201
									1: Execution possible (not executing)
		Network Instruction				1	SR 25203		0: Normal end
		Error Flag							1: Abnormal end
						0	SR 25200
CVM1, and CV-series
PLCs
	Name					Address			Contents
				Word		Bit
	Network			A502	Port number corresponds			0: Execution not enabled (executing)
	Instruction				to bit number, i.e., port 0:			1: Execution enabled (not executing)
	Enabled Flag				bit 00, port 1: bit 01, etc.
	Network			A502	Port number corresponds			0: Normal end
	Instruction				to bit number plus 8, i.e.,			1: Abnormal end
	Error Flag				port 0: bit 08, port 1: bit 09,
					etc.
CQM1H-series PLCs
			Name			Address			Contents
		Network Instruction				AR 0209	0: Execution not possible (already executing)
		Enabled Flag					1: Execution possible (not executing)
		Network Instruction				AR 0208	0: Normal end
		Error Flag					1: Abnormal end

Network Status

The nodes on the network are shown in the following illustrations.

C200HX/HG/HE PLCs

Operating level 0	Operating level 1
AR 08	AR 12
AR 09	AR 13

The numbers in the squares indicate node addresses. The corresponding node participation status is as follows: 0: Not part of network

1: Part of network

CS/CJ-series, CVM1, and

CV-series PLCs

CIO 1500 + 25 ⋅ N + 2

CIO 1500 + 25 ⋅ N + 3

N: Unit number

The numbers in the squares indicate node addresses. The corresponding node participation status is as follows:

0:Not part of the network

1:Part of the network

CQM1H-series PLCs

IR 192

IR 193

The numbers in the squares indicate node addresses. The corresponding node participation status is as follows: 0: Not part of network

1: Part of network

190