Omron CS1W-RPT01, CVM1-CLK21, CJ1W-CLK21-V1, C200HW-CLK21 Relay Terminal Blocks, Name Model Remarks

Specifications and Configurations Section 1-2

Item		Specifications
Transmission line	Multi-drop	1:1 type	1:1 type
format	Tree
	T-Branch Wiring	Partial Conversion to Optical
		Wire cable	Wire cable
	Repeater Unit
		Repeater Unit	Repeater Unit
			Optical cable
	Long-distance Wiring
	500 m max.
	(at 2 Mbit/s)
	Repeater Unit
	500 m max.
	(at 2 Mbit/s)
	62-node Configuration
	31 nodes max.
	Repeater Unit
	31 nodes max.
Installation	Units are not mounted on the PLC, but are attached to DIN Track or screw-mounted.

Weight	126 g		113 g (excluding mount-	116 g (excluding mount-
			ing bracket)	ing bracket)
Current consumption	24	V DC at 60 mA max.	24 V DC at 60 mA max.	24 V DC at 70 mA max.
Power supply volt-	24	V DC
age
Allowable power	20.4 to 26.4 V DC (24 V DC −15 to 10%)
supply voltage range
Inrush current	2.5 A max. at 24 V DC (5 ms after startup)

Note 1. Repeater Units do not use a node address.

2.See Connection Procedure for an explanation of how Repeater Units are used.

3.The following Power Supply Unit is recommended: OMRON S82K Series

Relay Terminal Blocks

The following Relay Terminal Block can be used to make maintenance easier by facilitating replacement of the Controller Link Unit after system operation has begun.

Name	Model	Remarks
Relay Terminal Block for	CJ1W-TB101	Cannot be used on the nodes
Wired Controller Link Units		on the ends of the network

20