Omron CVM1-CLK21, CS1W-RPT01, CJ1W-CLK21-V1, C200HW-CLK21, CQM1H-CLK21, CS1W-CLK21-V1 139

Setting Data Links Section 5-2

N+12

N+13

N+14

N+15

N+16

N+17

N+18

N+19

N+20

N+21

N+22

N+23

N+24

N+25

15								8	7							0
				1:N allocation type setting (Set value 0002 = 1 to 1 type)													---
						Rightmost 4 digits of start word (BCD)
																	(1)
			Area							Leftmost digit of area start word (BCD)
				Number of common send words for master node (BCD)													(2)
				Number of individual send words for master node (BCD)													(3)
						Number of send words for slave nodes (BCD)											(4)
							0000 (Reserved)										---
							0000 (Reserved)										---
							0000 (Reserved)										---
					First word to store data link status (bit-access area) (BCD)												---
16	15	14	13	12		11	10	9	8	7	6	5	4	3	2	1
32	31	30	29	28		27	26	25	24	23	22	21	20	19	18	17	(5)
48	47	46	45	44		43	42	41	40	39	38	37	36	35	34
																33
---	---	62	61	60		59	58	57	56	55	54	53	52	51	50	49

Note

Setting Ranges for Automatic Creation with 1:N allocations, 1 to 1 Type

Words N+22 through N+25 register nodes that will participate in the data links. The numbers in the table are the node addresses. The bit status given for each node address indicates whether the node is to participate in the data links.

Participate: ON

Not participate: OFF

1.Leave the reserved words set to 0 (N+18 to N+20).

2.When using automatic data link creation with 1:N allocations, set DM Pa- rameter Area words N+2 to N+11 (which were previously used for automat- ic setting with equality layout) to 0.

Item	Setting range
Data link mode	Specify automatic data link creation with 1:N allocations.
1:N allocation	Specify 1 to 1 type.
Area start word	Set the word address in BCD.
	IR or CIO Area: 0 to 6143
	LR Area: LR 000 to LR 199 (1000 to 1199) (See note.)
	DM Area: D00000 to D32767
	EM Area: Banks 0 to 12 E00000 to E32767
	Note: When a word between LR 000 and LR 199 is spec-
	ified, the data link area will be allocated between words
	1000 and 1199 in the IR or CIO Area.
Area type	Set the area type of area 1 as a hexadecimal number.
	IR Area: 80 Hex
	LR Area: 86 Hex
	DM Area: 82 Hex
	EM Area Banks 0 to 7: 90 to 97 Hex
	Banks 8 to 12: A8 to AC Hex

139