Omron CS1W-CLK21-V1, CVM1-CLK21 Controller Link Support Software Menu Overview, CX-Programmer

Specifications and Configurations							Section 1-2
Controller Link Support Software Menu Overview
		•		•	Save table	•	Print table
Menu items:	Data Link		Edit table
	Set Network parameters	•	Copy table	•	Retrieve table	•	Start/Stop
	Routing tables	•	Initialize table	•	Transfer table	•	Monitor status
	Echoback test	•	Check table	•	Delete table	•	Device info set
	Broadcast test
	Monitor Network
	Display Error log
	Display Node status
	Display Board setup	•	Unit backup
	Maintenance
	Connection Info*	•	Board backup
	Edit PC ID	•	Initialize network parameters
	System setup				*Optical Ring Link Systems only.

Note 1. Refer to the Controller Link Support Software Operation Manual (W308) for detailed operating procedures.

2.Use the CX-Net in CX-Programmer version 5.0 or higher to set data link areas in which the number of send and receive words exceeds 12,000, or to set data link tables that allocate the same area for Area 1 and Area 2. Controller Link Support Software cannot be used for these settings.

3.For automatic data link creation with 1:N allocations or when changing data link tables while the data link is active (CS1W-CLK21-V1 and CJ1W- CLK21-V1), use the CX-Net in CX-Programmer version 3.2 or higher. Con- troller LInk Support Software cannot be used to perform these functions.

CX-Programmer

The CX-Net operations within the CX-Programmer is required when using user-set data links, or when setting or monitoring detailed settings of the Con- troller Link Unit. This software can be used with a CS/CJ-series PLC and is ideal for the following applications.

•Setting the data link mode to “manual” (creating and storing data link tables).

•Starting/stopping data links.

•Reading (monitoring) network status.

•Reading error logs.

•Setting routing tables.

•Testing the Network.

•Changing network parameters.

24