Omron CS1W-RPT01 Optical Bus or Optical Ring System H-PCF Cable, Name Specifications Model

Wiring Section 3-3

Communications Cables

Optical Bus or Optical Ring System (H-PCF Cable)

Note

The following devices are required for the Optical Bus or Optical Ring (H-PCF) Controller Link Network. The cable and connectors are the same as those used for Optical SYSMAC LINK Networks.

Optical Fiber Cables (Indoor Use Only)

Use the following Optical Fiber Cables (Hard Plastic-clad Fiber: H-PCF).

Name		Specifications		Model
H-PCF cables	Black		10 m	S3200-HCCB101
			50 m	S3200-HCCB501
			100 m	S3200-HCCB102
			500 m	S3200-HCCB502
			1,000 m	S3200-HCCB103
	Orange		10 m	S3200-HCCO101
			50 m	S3200-HCCO501
			100 m	S3200-HCCO102
			500 m	S3200-HCCO502
			1,000 m	S3200-HCCO103

Note The Optical Fiber Cable model numbers are as follows.

S3200-H@@@@@@@

				Tensioner option
				None: Standard (with tension member)
				N:	Without tension member
				Cable length
			@@@
				A B
				(A/10) x 10B m
				Cable color
				B:	Black
				O:	Orange
				Cable specification
				L: With power supply line
				C: Without power supply line
				Type
				B:	Cord
				C:	Cable
Name		Model			Specifications
Connector	S3200-COCF2071		Use to connect a cable to a node.
			(Full-lock connector for crimp-cut cable.)
	S3200-COCF2571		Use to connect a cable to a node.
			(Half-lock connector for crimp-cut cable.)
Inline Adapter	S3200-COIAT2000		Use to connect or extend cables.
			(Use one adapter for each connection.)

1.Either full-lock or half-lock connectors can be used in a Controller Link Net- work, but we recommend full-lock connectors to prevent accidental discon- nections during operation.

2.The maximum distance between nodes is slightly shorter for connectors with crimp-cut cables compared to connectors assembled with adhesive. Also, the maximum distance is reduced due to extension loss when Inline Adapters are used to extend cables.

74