Omron CVM1-CLK21, CS1W-RPT01 Error LOG Clear, Configuration of each error record is as follows

Commands and Responses for Controller Link Units Section 6-5

The configuration of each error record is as follows:

1st byte 10th byte

Error code Details

Minute Day Hour Year Month

Second

Error code, details: These parameters show the contents of errors. For details, refer to 9-3-2 Error Codes.

Date and time: These parameters show the seconds, minutes, hour (0 to 23), date, month, and year (the rightmost two digits) in BCD specifying the time that the error occurred.

Note 1. If the PLC does not have the specified number of records, all the records that have been stored in the PLC up to the point that the command is exe- cuted will be returned.

2.If there is no error log registered, a response code of 1103 (Hex) will be returned.

6-5-12 ERROR LOG CLEAR

Clears all error log records and sets the error log pointer to 0.

Command Block

21 03

Command format

Response Block

21 03

Command Response

format code

211