Omron CS1W-RPT01, CVM1-CLK21, CJ1W-CLK21-V1 To 1 Type, CX-Programmer version 3.2 or higher

Data Links Procedures				Section 2-1
		1 to 1 Type
		Contents	Method	Nodes	Page
	a.	Set the data link mode	Use Support Soft-	Data link startup node	113
		to automatic.	ware for the PLC	only
			including Program-	The node that is used
			ming Console (see	to start the data link is
			note).	called the startup
				node. It is necessary
				to decide beforehand
				which node will be
				the startup node.
	b.	1:N creation		Data link startup node	138
				only
	c.	Set the area
	d.	Set the data link start
		word
	e.	Set the number of
		common send words
		per master node
	f.	Se the number of indi-
		vidual send words per
		master node
	g.	Set the number of
		send words per slave
		node
	h.	Set the first data link
		status word
	i.	Set the nodes to par-
		ticipate in the data
		links.

Note For automatic data link creation with 1:N allocation, use CX-Net in

CX-Programmer version 3.2 or higher.

38