Omron CVM1-CLK21 Devices for Connection, Communications Cables, Repeater Units when Required

Specifications and ConfigurationsSection 1-2

1-2-5	Devices for Connection
			To set up a Controller Link Network, the following devices are needed in addi-
			tion to a Controller Link Unit and a PLC.
Communications Cables
			The following shielded twisted-pair cables are recommended for Wired Con-
			troller Link Network connections.
			Model			Manufacturer		Remarks
			Li2Y-FCY2 x 0.56 qmm		Kromberg & Schubert,		German company
					Komtec Department
			1 x 2 x AWG – 20PE +		Draka Cables Industrial		Spanish company
			Tr.CUSN + PVC
			#9207		Belden		USA company
			ESVC 0.5 x 2 C-1362		Bando Densen Co.		Japanese company
			ESNC 0.5 x 2 C-99-087B		Nihon Electric Wire &		Japanese company
					Cable Co.
		Note Use the special connector provided with the Board to connect the Controller
			Link Support Board to the network.
Repeater Units (when Required)
			The following Repeater Units can be used to facilitate the use of T-Branch wir-
			ing, long-distance wiring, and the addition or removal of nodes.
			Three types of Repeater Unit are available for use with different transmission
			line types (i.e., connection methods).
	Item			Specifications
Model		CS1W-RPT01				CS1W-RPT02		CS1W-RPT03
External appearance
Supported Units/		All Controller Link Units/Boards for wired networks.
Boards		Note To construct a network that can contain up to 62 nodes, it is necessary to use version-1
		models, which support 62 nodes.
Transmission line		Twisted-pair cable				H-PCF cable (optical		GI cable (optical two-
						two-core cable)		core cable; 62.5/125 ∝m,
								50/125 ∝m)

19