Omron C200HW-CLK21, CVM1-CLK21, CS1W-RPT01, CJ1W-CLK21-V1 Token Ring Mode, CS1W-CLK12-V1 CVM1-CLK12

Overview Section 1-1

Maximum 62-node Configuration

Note

Connecting Repeater

Units Using H-PCF Optical

Fiber Cable

Wired Controller Link Unit

Twisted-pair cable	CS1W-RPT01
	Repeater Unit

31 nodes max.

Wired Controller Link Unit

Twisted-pair cable

31 nodes max.

The following Controller Link Units/Support Boards must be used to construct a network with more than 32 nodes:

CS1W-CLK21-V1 CJ1W-CLK21-V1 3G8F7-CLK21-V1

1.The network will not operate correctly unless all nodes within the network use the above Units/Boards.

2.Only node addresses 1 through 32 can be used on networks for which 62 nodes have not been enabled.

CS-series and CVM1/CV-series PLCs only.

Token Ring Mode

CS1W-CLK12-V1	CVM1-CLK12
Controller Link Unit	Controller Link Unit
(token ring mode)	(token ring mode)

CS-series PLC CVM1/CV-series PLC

Personal computer

Backup power supply (24 V DC)

C

P

U

H-PCF Optical fiber cable

(ring connection)

C

P

U

C P U

C P U

3G8F7-CLK12-V1

Controller Link Support Board for PCI Bus (token ring mode)

CS-series PLC CVM1/CV-series PLC

CS1W-CLK12-V1 Controller Link Unit (token ring mode)

CVM1-CLK12 Controller Link Unit (token ring mode)

4