Omron CS1W-RPT01, CVM1-CLK21, CJ1W-CLK21-V1, C200HW-CLK21, CQM1H-CLK21, CS1W-CLK21-V1 116

Setting Data Links				Section 5-2
	Setting item			Setting range
	First data link sta-		Set the first word to store data link status. An area of 16 words is
	tus word		used.
			CIO Area: CIO 001 to CIO 6128 (*1)
			LR Area: LR 00 to LR 184 (*2)
			DM Area: DM 0000 to DM 32752
			EM Area: Banks 00 to 12, EM 0000 to EM 32752
			*1: When IR 000 is specified or when the default setting (––––)
			is left unchanged, the default first status word will be used.
			Refer to 5-4 Checking Data Link Status for details.
			*2: When a word between LR 000 and LR 184 is specified, the
			data link area will be allocated between CIO 1000 and
			CIO 1184.
	Area 1	Data link	CIO Area: CIO 000 to CIO 6143
		start word	LR Area: LR 00 to LR 199 (*)
			DM Area: DM 0000 to DM 32767
			EM Area: Banks 00 to 12, EM 0000 to EM 32767
			Unit Ver. 1.2 or later: The same memory areas can be set for
			both Area 1 and Area 2.
			*: When a word between LR 000 and LR 199 is specified, the
			data link area will be allocated between CIO 1000 and
			CIO 1199.
		Number of	Remote nodes:	0 to the number of source words
		words		Set the number of words to be received.
			Local node:	0 to 1,000
				Set the number of words to be transmitted.
			The total number of words in area 1 and area 2 in each node
			must not exceed 1,000.
			The numbers of words in both area 1 and area 2 in each node
			must not be set to 0.
		Offset	Remote nodes:	0 to one less than number of source words
				Set the offset for the data to be received.
			Local node: Cannot be set.
			This setting is not required if an offset is not used.
	Area 2	Data link	CIO Area: CIO 000 to CIO 6143
		start word	LR Area: LR 00 to LR 199 (*)
			DM Area: DM 0000 to DM 32767
			EM Area: Banks 00 to 15, EM 0000 to EM 32767
			(EM must be installed)
			Unit Ver. 1.2 or later: The same memory areas can be set for
			both Area 1 and Area 2.
			*: When a word between LR 000 and LR 199 is specified, the
			data link area will be allocated between CIO 1000 and
			CIO 1199.
		Number of	Remote nodes:	0 to the number of source words
		words		Set the number of words to be received.
			Local node:	0 to 1,000
				Set the number of words to be transmitted.
			The total number of words in area 1 and area 2 in each node
			must not exceed 1,000.
			The numbers of words in both area 1 and area 2 in each node
			must not be set to 0.
		Offset	Remote nodes:	0 to one less than number of source words
				Set the offset for the data to be received.
			Local node:	Cannot be set.
			This setting is not required if an offset is not used.

116