Omron CS1W-RPT01, CVM1-CLK21, CJ1W-CLK21-V1 Response, Designations for memory area designations

Commands and Responses for C200HX/HG/HE and CQM1H-series PLCs Section 6-6

Response Block

23 02

Command Response

code code

Note The bits (flags) in the following memory areas can be force-set or force-reset.

Memory area	Data
IR, SR, LR, HR, and AR	Bit status
areas
Timer/Counter	Completion Flag status

6-6-17 MULTIPLE FORCED STATUS READ

Reads the forced status of the specified range of words or timers/counters.

Command Block

23	0A
Command			Beginning	Number of
code			address	units
		Memory

area code

Response Block

23 0A

Command	Response	Memory	Beginning	Number of	Data
code	code		address	units
		area code

Parameters	Memory area code, Beginning address, Number of units (command,
	response): Specify the memory area code, the beginning address in that
	area, and the number of words or timers/counters to read. The number of
	units can be set from 0001 to 0040 (Hex) (1 to 64 in decimal). The total of 64
	continuous bits (for 4 words) for the number of bits or words and the total of 64
	units (for 32 words) for the timers/counters can be read at one time.
	The actual area, beginning address, and number of units read will be returned
	in the response.
	Memory Areas
	Forced status can be read in the following areas. Refer to 6-6-2 Memory Area
	Designations for memory area designations.
	Area	Data type	Memory area	Number of
			code	bytes
	IR, SR, LR, HR, and	PV of word	80	2
	AR areas
	Timer/counter area	Completion Flag status	01	1

Note Forced status is read by words for the IR, SR, LR, HR, or AR area and by bits/ flags for the Timer/Counter area.

Data (response): Forced status is returned beginning from the specified word or timer/counter. The number of bytes returned will be (the number of units) x (the number of bytes/unit).

224