Omron CVM1-CLK21, CS1W-RPT01 About this Manual, Name Contents Cat. No Suffixes omitted

About this Manual:

This manual describes the installation, setup, and operation of the C200HW-CLK21, CS1W-CLK21- V1, CJ1W-CLK21-V1, CVM1-CLK21, and CQM1H-CLK21 Controller Link Units for C200HX/HG/HE, CS/CJ-series, CVM1, CQM1H-series, and CV-series PLCs, and includes the sections described below. The Controller Link Units are used to connect these PLCs to a Controller Link Network. Infor- mation is also provided in this manual on CS1W-RPT01/02/03 Repeater Units. The following three manuals are directly related to application of the Controller Link Network.

Name	Contents	Cat. No.
		(suffixes omitted)
SYSMAC CS1W-CLK21, CJ1W-CLK21,	Installation, setup, and operating procedures for the Con-	W309
C200HW-CLK21, CVM1-CLK21.	troller Link Units. Controller Link Units are used to connect
CQM1H-CLK21 Controller Link Units	PLCs to a Controller Link Network.
Operation Manual (this manual)
3G8F7-CLK12-E-V1/CLK52-E-V1/	Operating procedures for Controller Link Support Boards	W383
CLK21-E-V1 Controller Link Support	for PCI bus connections. Controller Link Support Boards
Boards for PCI Bus	are used to connect IBM PC/ATs or compatibles to a Con-
Operation Manual	troller Link Network.
3G8F7-CLK12-E/CLK52-E/CLK21-E Con-	Installation and setup procedures for Controller Link Sup-	W388
troller Link Support Boards for PCI Bus	port Boards for PCI bus connections. Controller Link Sup-
Installation Guide	port Boards are used to connect IBM PC/ATs or
	compatibles to a Controller Link Network.
3G8F5-CLK11-E, 3G8F5-CLK21-E Con-	Installation, setup, and operating procedures for Controller	W307
troller Link Support Boards for ISA Bus	Link Support Boards for ISA bus connections. Controller
Operation Manual	Link Support Boards are used to connect IBM PC/ATs or
	compatibles to a Controller Link Network.
CS1W-CLK12, CVM1-CLK12 Optical	Installation, setup, and operating procedures for the Optical	W370
Ring Controller Link Units	Ring Controller Link Units. Controller Link Units are used to
Operation Manual	connect C200HX/HG/HE CV-series, and CS-series PLCs
	to a Controller Link Network.
C200HW-ZW3AT2-E-V2 Controller Link	Installation and operating procedures for the Controller	W369
Support Software	Link Support Software. The Controller Link Support Soft-
Operation Manual	ware enables manually set data links and other procedures
	for a Controller Link Network.

Depending on the system, you may also need the CX-Programmer, or a Programming Console. Refer to the body of this manual for details. Please read this manual and related manuals carefully and be sure you understand the information provided before attempting to install and operate a Controller Link Unit.

Precautions provides general precautions for using the Controller Link Unit and related devices. Section 1 provides basic information on Controller Link Networks, and will give the reader an overview of what Controller Link Networks can do and how best to use them.

Section 2 describes the basic procedures to use the Controller Link Unit. The settings necessary for using each of the functions are also explained briefly. For more details, refer to the following sections on individual functions.

Section 3 describes how to install a Controller Link Unit and how to wire the Controller Link Network. Details are also provided on installation, wiring, and basic operating procedures of Repeater Units, including information on using them to construct networks.

Section 4 describes the settings required for starting communications. These basic settings are required for both data links function and the message service. Carry out the settings described here before turning on power to the Controller Link Unit.

Section 5 describes how to use data links in a Controller Link Network. Refer to SECTION 2 Basic Procedures for an outline of data link application.

Section 6 explains how to use the message service provided by a Controller Link Unit. It also explains the FINS commands and responses supported by Controller Link Units and those supported by C200HX/HG/HE, CVM1, and CV-series PLCs.

xiii