Omron CVM1-CLK21, CS1W-RPT01, CJ1W-CLK21-V1, C200HW-CLK21 Preparations for Communications

SECTION 4

Preparations for Communications

This section describes the settings required for starting communications. These basic settings are required for both data links function and the message service. Carry out the settings described here before turning on power to the Controller Link Unit.

4-1 CS-series Controller Link Units		86
4-1-1	Overview	86
4-1-2	Unit Number	86
4-1-3	Node Addresses	87
4-1-4	Baud Rates	88
4-1-5	Terminating Resistance	89
4-2 CJ-series Controller Link Units		89
4-2-1	Overview	90
4-2-2	Unit Number	90
4-2-3	Node Addresses	91
4-2-4	Baud Rates	92
4-2-5	Terminating Resistance	92
4-3 C200HX/HG/HE Controller Link Units		93
4-3-1	Overview	94
4-3-2	Node Addresses	94
4-3-3 Baud Rates and Operating Levels		95
4-3-4	Terminating Resistance	96
4-4 CVM1 and CV-series Controller Link Units		97
4-4-1	Overview	97
4-4-2	Unit Number	98
4-4-3	Node Addresses	98
4-4-4	Baud Rates	99
4-4-5	Terminating Resistance	99
4-5 CQM1H-series Controller Link Units		100
4-5-1	Overview	100
4-5-2	Node Addresses	101
4-5-3	Baud Rates	101
4-5-4	Terminating Resistance	102
4-6 Repeater Units		102
4-6-1	Wire-to-Wire Repeater Unit	103
4-6-2	Baud Rates	103
4-6-3	Terminating Resistance	104

85