Omron CJ1W-CLK21-V1, CVM1-CLK21, CS1W-RPT01, C200HW-CLK21, CQM1H-CLK21, CS1W-CLK21-V1 135

Setting Data Links Section 5-2

N+12

N+13

N+14

N+15

N+16

N+17

N+18

N+19

N+20

N+21

N+22

N+23

N+24

N+25

15									8	7								0
				1:N allocation type (Set value 0001 = Common type)															---
							Start word for area 1 (bit-access area, BCD)
																			(1)
			Area for area 1											00
					Area 1 send size (number of words) for master node (BCD)														(2)
					Area 1 send size (number of words) for slave nodes (BCD)														(3)
					Rightmost 4 digits of start word for area 2 (DM Area) (BCD)
																			(4)
			Area for area 2								Leftmost digit of start word for area 2 (BCD)
						Area 2 send size (number of words) for master node (BCD)													(5)
						Area 2 send size (number of words) for slave nodes (BCD)													(6)
							First word to store data link status (bit-access area) (BCD)												---
16	15	14	13		12		11	10	9	8	7	6	5		4	3	2	1
32	31	30	29		28		27	26	25	24	23	22	21		20	19	18	17	(7)
48	47	46	45		44		43	42	41	40	39	38	37		36	35	34
																		33
---	---	62	61		60		59	58	57	56	55	54	53		52	51	50	49

Setting Range for Automatic Setting, 1:N Allocations, Common Type

Words N+22 through N+25 register nodes that will participate in the data links. The numbers shown in the table are the node addresses. The bit status for each node address indicates whether the node is to participate in the data links.

Participate: ON

Not participate: OFF

Note When using automatic data link creation with 1:N allocations, set DM Parame- ter Areas words N+2 to N+11 (which were previously used for automatic set- ting with equality layout) to 0.

Item	Setting range
Data link mode	Specify automatic data link creation with 1:N allocations.
1:N allocation	Specify Common type.
Start word for area 1	Set the word address in BCD.
	CIO Area: 0000 to 6143
	LR Area: LR 000 to LR 199 (CIO 1000 to CIO 1199) (See
	note.)
	DM Area: DM 00000 to DM 32767
	EM Area: Banks 0 to 12: EM 00000 to EM 32767
	Note: When a word between LR 000 and LR 199 is spec-
	ified, the data link area will be allocated between words
	CIO 1000 and CIO 1199 in the CIO Area.
Area for area 1	Set the area for data link area 1 as a hexadecimal num-
	ber.
	CIO Area: 80 hex
	LR Area: 86 hex
	DM Area: 82 hex
	EM Area Banks 0 to 7: 90 to 97 hex
	Banks 8 to 12: A8 to AC hex
	When area 1 is not used: 00 hex

135