![](/images/new-backgrounds/1264812/264812143x1.webp)
Power Rewind Media Alignment
(Power rewind option required.)
NOTE: Under normal operating conditions, media alignment should not be necessary if the media/backing was initially installed tightly against the backplate of the
Perform the following adjustment if the media does not track properly onto the
Refer to Figure 28.
1.With media and backing material loaded, open the printhead assembly.
2.Turn the adjustment dial clockwise to align the media/backing material more to the right. (The image will move to the left.)
or
Turn the dial counterclockwise to align the media/backing material more to the left. (The image will move to the right.)
3.Manually rotate the
4.Close the printhead assembly.
64 | Zebra Z4M Printer User’s Guide |