CANCEL Key Self Test
This self test prints a listing of the configuration parameters currently stored in the printer’s memory. See Figure 29. (Depending on the options ordered, your label may look different.)
1.Turn off the printer.
2.Press and hold the CANCEL key while turning on the power.
3.Release the key after the DATA light turns off (approximately five seconds).
The configuration may be changed either temporarily (for specific label formats or ribbon and label stock) or permanently (by saving the new parameters in memory). Refer to page 15 for further information about the configuration procedure.
Figure 29
74 | Zebra Z4M Printer User’s Guide |
