101. Basic Setup and Operation
Setting Up and Using TV Inputs, continued
Setting Up Inputs with Auto Input Sensing
Learn more about Auto Input Sensing on page 27.
1.Power on the TV.
2.Power on the devices to ensure detection.
3.Connect one device to the TV, making note of the TV input jack.
The TV will display the New Device Found screen if the connection type is detectable.
4.Highlight the device type in the
Sample New Device Found screen.
5.Press EXIT to close the New Device Found screen.
6.Repeat the preceding steps for each additional device you want to add.
Selecting an Input to Watch
1.Press INPUT.
2. Press 
and 
to highlight an input icon.
Sample Input Selection menu, DVD input selected
3.Press ENTER to switch to the input.
Note: In most cases, to see a named icon for a con- nected device (as in the samples), you must first assign a name either
•When the device is first connected and the New Device Found menu offers a choice of names.
•By using the Inputs > Name menu to assign or change a name at any time after the TV has detected the connection.
More About the Input Selection Menu
•To assign helpful names to the icons, see the Inputs > Name menu.
•To remove unwanted Antenna or HDMI device icons from the Input Selection menu, see the Inputs > Name menu.
•To rearrange the icons, use the Inputs > Order menu.
Detailed information on using these menus is in the sup- plemental Owner’s Guide at
Watching Broadcast TV
TV Connected to an Antenna or Direct Cable Service (no cable box)
Note: Perform channel memorization to enable recep- tion of digital channels. See page 7.
1.Press INPUT to display the Input Selection menu.
2.Highlight the antenna or cable icon and press ENTER.
Sample Input Selection menu, antenna input selected
3.To tune to a channel from the ANT input, use any of these methods.
•Enter the channel number using the number keys on the remote control and press ENTER .
For a
—
press 3 CANCEL 1 ENTER .
•Press CH to change channels one channel at a time.
•Press and hold CH to speed through channels.
•Press LAST to return to the previous channel.
•Use the Fav (Favorites) feature to tune to up to nine favorite channels. See page 19.
•Press GUIDE to display ChannelView channel listings. Highlight a channel number, then press ENTER to tune.
•Set up ChannelView custom channel banks and use the CH key to tune within predefined groups of channels.
For assistance call 1(877)
