Mitsubishi Electronics L75-A94 manual 3D Video, Initial Setup, Automatic

Connecting an external emitter

263. TV Features

3D Video

To display 3D content, your Mitsubishi TV requires:

•Active-shutter 3D glasses compatible with any one of the following:

-The TV’s internal emitters

-A matching external synchronization emitter connected to the TV’s back panel

-DLP link

Glasses compatible with the TV’s internal emitters are:

-XPAND model 3DG-X103 IR glasses made for Mitsubishi 3D TVs

-XPAND model X103 Universal IR glasses

For more information, visit the 3D TV page at www.mitsubishi-tv.com.

•A compatible 3D source device connected to the TV via HDMI or StreamTV internet and outputting a

3D signal in one of these formats:

-Frame Packing 1080p/24-Hz or 720p/60-Hz

-Top-Bottom 1080p/24-Hz or 720p/60-Hz

-Side-by-Side format, 1080p, 24/30/60-Hz; 720p, 60-Hz

-Checkerboard format, 1080p, 60-Hz; (lower resolu- tions may be supported but will not fill the screen)

Off

•Turns off 3D images; displays 3D content as 2D (you may see two images).

•Restores normal TV adjustment options when viewing an ordinary 2D signal.

Automatic

•Switches the TV to 3D mode and selects the correct 3D format when the TV detects a 3D signal from an HDMI 1.4a-compliant device.

•Automatically switches the TV out of 3D mode when receiving a normal 2D signal.

Choice of Source Formats If your device is not HDMI 1.4a compliant, you must choose the correct setting from this list.

Use the Picture > 3D Mode menu to enable 3D video.

For assistance call 1(877) 675-2224

Initial Setup

1.If your 3D glasses came with a synchronization emitter, connect the unit to the 3D GLASSES EMITTER jack. Place the emitter at the front of the TV where there is a clear path to the glasses.

Note: No emitter is required if using the TV’s internal emitters or DLP Link.

3D GLASSES EMITTER

2.Power on the TV and the source device.

3.Connect the source device to the TV’s HDMI input.

4.When the New Device Found screen displays, name the input.

5.Press EXIT to close the New Device Found screen.

Notes on the TV’s Internal Emitters

If using glasses
compatible with the TV’s	Internal IR
internal IR emitters, keep	Emitters for 3D
a clear path from the	Glasses
glasses to the emitter.
16 ft.	Effective range of the
20°	emitters in the vertical
25 ft.	and horizontal planes

20°

16 ft.

35°

25 ft. 35°

16 ft.