![](/images/new-backgrounds/1264812/264812159x1.webp)
A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label.
Problem | Solution |
The host is set to EPP parallel | Change the settings on the computer host to standard |
communications. | parallel communications. |
|
|
| Check the communication cable length. See page 18 |
The serial communication settings are | for requirements. |
| |
incorrect. | Check the printer driver or software communications |
| |
| settings (if applicable). |
|
|
A label format was sent to the printer but not recognized. The DATA light flashes but no printing occurs.
Problem | Solution | |
The prefix and delimeter characters set in | Verify the prefix and delimeter characters. See | |
the printer do not match the ones in the | ||
page 49. | ||
label format. | ||
| ||
|
| |
Incorrect data is being sent to the printer. | Check the communication settings on the computer. | |
Ensure that they match the printer settings. | ||
| ||
|
|
72 | Zebra Z4M Printer User’s Guide |