Mode Selection
You can set the HomeLink Phoneline + 10/100 Network PC Card to default to either a 10BaseT connection or Phoneline connection. Since there are three ports, the card is set to Auto Detect an active connection. Auto Detect will look first for a connection on the 10BaseT port, and if one is not found, the card will default to the Phoneline connection.
You can configure the card to use only one connection type.
•10/100 Ethernet (External) mode will force the card to use a 10/100 connection if one is present.
•10BaseT Ethernet (Internal) mode will force the card to use a 10Mbps connection if one is present.
•Phoneline mode will force the card to use only the 1Mbps Phoneline connection.
page 34
