Linksys HPN100 manual Ethernet Configuration

Ethernet Configuration

This option allows you to choose the duplex and speed performance of the HomeLink Card’s RJ-45 Ethernet port. In order to change the port settings, the Mode Selection option must be set at 10BaseT Only, or 10/100BaseTX Only, or the mode must be set at Auto Detect with a valid link on the 10BaseT Port.

•10Mbps Half Duplex sets the 10BaseT port to half duplex mode. This is the default setting.

•10Mbps Full Duplex sets the 10BaseT port to full duplex mode.

page 33