Windows 95 Setup
After installing the HomeLink Phoneline + 10/100 Network PC Card hardware in your computer, follow the instructions below to install the HomeLink Phoneline + 10/100 Network PC Card's Windows 95 network driver from the card's program disk.
Please keep in mind that the installation procedure for the network driver will vary slightly depending on the version of Windows 95 you are using and your current system configuration.
To install the network driver, Start up your computer and Windows 95.
1.Windows 95 will automatically detect the presence of the HomeLink Phoneline + 10/100 Network PC Card in your computer. If Windows 95 goes directly to the windows desktop and does not display the New Hardware Found window, refer to the Troubleshooting section of this guide.
2.While the Update Device Driver Wizard window is visible, put the HomeLink Phoneline + 10/100 Network PC Card program disk 1 into drive A and click on Next.
page 18
