Performance Notes
!All fog machines develop condensation around the output nozzle. Because this may result in some moisture accumulation on the surface below the output nozzle, consider this condensation when installing your unit.
!All fog machines may sputter small amounts of fog occasionally during operation and for a minute or so after being turned off.
!All fog machines have a recycling period after long bursts when the machine will shut itself down for a short period in order to heat up again. During this time, no fog can be produced.
!If the supply cord is damaged, it must be replaced by ANTARI or its unhorized dealer to avoid a hazard.
Please read and save these instructions
11
