Elation Professional X-Fogger manual Danger of Explosion, exterior of your ANTARI Fog Machine

!Never aim the output nozzle at open flames.

!If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified personnel in order to avoid a hazard.

!The output nozzle becomes very hot during operation (3000C). Keep flammable materials at least 50 cm away from the nozzle.

!Always allow your ANTARI X Fogger to cool down before attempting to clean or service it.

Danger of Explosion

!Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.

!Use only the high-quality, water-based ANTARI fog . Other fog liquids may cause clogging or "spitting".

!Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid will cause damage to the pump as well as over-heating of the heater.

!If your ANTARI Fog Machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing material), and return it to your ANTARI dealer for service.

!Always drain tank before mailing or transporting this unit.

!Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse thoroughly with water.

Important:

Pay attention to all warning labels and instructions printed on the

exterior of your ANTARI Fog Machine.

3