Electro-Voice CP1800, CP2200 manual Specifications

SPECIFICATIONS

- Amplifier at rated conditions, both channels driven, 8Ω loads, unless otherwise specified.

			CP 1800
Load Impedance	2Ω		4Ω	8Ω
Maximum Midband Output Power	900W		600W	350W
THD = 1%, 1kHz, Dual Channel
Rated Output Power	--		500W	250W
THD < 0.1%, 20Hz ... 20kHz
Max. Single Channel Output Power	1450W		850W	450W
IHF-A
Max. Single Channel Output Power	1200W		720W	410W
Continuous, 1kHz, THD-1%
Max. Bridged Output Power	--		1800W	1200W
THD = 1%, 1kHz
Maximum RMS Voltage Swing			62V
THD = 1%, 1kHz
Power Bandwith			10Hz ... 60kHz
THD = 1%, ref. 1kHz, half power @ 4Ω
Voltage Gain			32,0 dB
ref. 1kHz
Input Sensitivity			+3.2 dBu (1.12 Vrms)
at rated output power
THD at rated output power,		< 0.05%
MBW = 80kHz, 1kHz
IMD-SMPTE		< 0.02%
60Hz, 7kHz
DIM30		< 0.01%
3.15kHz, 15kHz
Maximum Input Level			+22dBu (9.76 Vrms)
Crosstalk			<- 80dB
ref. 1kHz, at rated output power
Frequency Response		15Hz ... 40kHz (+/- 1dB)
ref. 1kHz
Damping Factor		> 300
1kHz
Slew Rate			30 V/ms
Signal to Noise Ratio, Amplifier			105.5dB
A-weighted
Output Stage Topology			Class H
Power Requirements	240, 230, 120V or 100V; 50 ... 60 Hz (factory configured)
Power Consumption			500W
1/8 maximum output power @ 4Ω
Protection	Audio limiters, High temperature, DC, HF, Back-EMF,
	Peak current limiters, Inrush current limiters, Turn-on delay
Cooling		Front-to rear, 3stage-fans
Safety Class			I
Dimensions			483 x 88,1 x 386,8
(W x H x D), mm
Weight			15 kg (33 Ibs)
Optional	Rear-rackmount 15,5“ (NRS 90262) 112930
	Rear-rackmount 18“ (NRS 90264) 112933

-Depending on the ambient temperature, the unit might not operate continuously at 2 ohms load in Dual Mode or 4 ohms load in Bridged Mode.