Electro-Voice ZXA1-100, ZXA1-90 Rotating the 90 Horn, Rotating the Logo

Electro-Voice® ZxA1 Owner’s Manual 7

Rotating the 90° Horn

The 90° version of the ZxA1 allows for the horn to be rotated for more effective coverage if desired. The

horn is factory-installed with the 90° coverage in the horizontal plane and the 50° coverage in the vertical

plane. The 100° version of the ZxA1 has the same coverage pattern in both the

horizontal and vertical planes, so rotating the horn will not change the

coverage pattern. To rotate the horn follow the steps below:

1. Remove the grille screws / grille assembly.

2. Remove the horn screws / horn assembly.

3. Rotate the horn assembly 90°.

4. Secure the horn assembly with the

horn mounting screws.

5. Secure the grille assembly

with the grille mounting

screws.

All versions of the ZxA1 allow for the logo badge to

be rotated if desired. The logo badge is square and

can be rotated in 90° increments. To rotate the logo

badge, follow the steps below:

1. Using a finger or flat-edge screwdriver (using care

not to scratch grille), grip under the logo badge.

2. Pull the logo badge outwards from the logo re-

cess until it fully clears the front surface of the grille.

3. Rotate the logo badge, in 90° increments, to the

desired orientation.

4. Release the logo badge and let it “spring” back

into the logo recess.

Figure 5:

Rotating the ZxA1-90 Horn

Figure 6:

Rotating the ZxA1 Logo

Horn Mount

Screws

Grille Mount

Screws

Grille

Assembly

Enclosure

90° x 50°

Horn

90° x 50°

Horn