Mounting of attachment fitting on the sides of the
If the appliance is mounted in a 270 X 490 mm cutout, or if for other reasons there is no room for the side attachments, these should be removed before the appliance is set into the worktop.
Set the appliance into the worktop and then raise it enough to expose the screws in the sides.
Remove the screws.
Mount the attachment fittings so that they interlock with the frame (See illustration).
Reinsert the screws in the sides through the oblong hole in the fitting.
Set the appliance into the worktop and tighten the attachment fittings.
19
